Corrosion inhibitor
Over 90 % anticorrosive protection in crudes with water and sweet and sour corrosive gases.
General
Corrosion inhibitor with a protective effect for the chemical treatment of any light or heavy crude oil in the 11 to 42 °API range, with high water content and sweet and sour corrosive gases. Hydrocarbon-dispersible amber liquid.
Application
Onshore and offshore installations: wells, headers, separation batteries of the distribution system and hydrocarbon treatment.
Uses and benefits
Suitable for light, heavy and extra-heavy crudes; efficient over a wide range of temperatures and pressures. Achieves an anticorrosion efficiency above 90 %.
Recommended dosage
Laboratory tests are recommended to determine the optimum dosage according to the characteristics of the crude. Typically 10 to 50 ppm for light, heavy and extra-heavy crude. Continuous or batch application.
Packaging and storage
200-liter plastic drums, 1,000-liter high-density polyethylene containers with metal cage, or stainless steel containers. Store in a cool, ventilated place, protected from direct sun and rain, with containers closed when not in use. Review the product safety data sheet.
- Category
- Integrity and safety
- Crude range
- 11 to 42 °API
- Solubility
- Hydrocarbon-dispersible
- Typical dosage
- 10 to 50 ppm
Physicochemical properties
| Parameter | Unit | Method | Specification |
|---|---|---|---|
| Appearance | Visual | Clear amber liquid | |
| Kinematic viscosity at 40 °C | cSt | ASTM D445 | 10 min., 15 max. |
| Flash point | °C | ASTM D56 | 0 min. |
| Solubility, 50 % vol. xylene | Visual | Dispersible | |
| Solubility, 50 % vol. water | Visual | Soluble |
Certificate of analysis
Every batch is analysed against the specifications on this sheet before release and ships with its certificate of analysis (CoA) and safety data sheet (SDS).
Technical contact
Dosage, compatibility, laboratory testing and field application: info@tabquimicosintl.com · +1 (956) 708-6776
Disclaimer
The information on this sheet is given in good faith and reflects the specifications in force at the revision date. Values are product specifications unless stated as typical. Optimum dosage is determined by laboratory tests on the fluid to be treated. Field performance depends on conditions outside our control; no warranty is given beyond what the contract provides. Review the SDS before handling.